Ticking Stripe Heart Wreath From Recycled Materials

How to make a ticking stripe heart wreath with vintage-style from recycled materials. I've been on a mission to create unique decor using what I already have on hand. Everything about this pretty DIY Valentine wreath is recycled and didn't cost a dime to make.



Ticking fabric DIY Valentine wreath made with recycled materials.

Red Ticking Stripe Valentine Wreath DIY

While I made the heart wreath for Valentine's Day, it would be pretty hanging in a bedroom year round or would make lovely wedding decor.



A handmade red ticking stripe heart wreath made with recycled materials.

Instead of buying one, the only investment you'll need for the heart-shaped wreath form is family pizza night because it's handmade with a recycled 14-inch pizza box.



Recycling a 14-inch pizza box to use for a heart wreath form.

The pretty red ticking stripe ruffle around the wreath is from a recycled chair slipcover we are no longer using. But if you don't have a ruffle that you can salvage from an old pillow cover or garment, then ruffle ribbon or lace would be lovely too.



A red ticking stripe chair slipcover ruffle remnant to embellish a DIY heart wreath.

I've been slowly recycling every remnant of the old ticking stripe slipcover. So far I've made a ticking stripe office chair pillow, ticking stripe Christmas ornaments, ticking stripe fabric pumpkins, and a ticking stripe upholstered stool. So I'm happy to finally find a purpose for part of the ruffle.



I also recycled a remnant from a decorative metal sheet to embellish the center of the wreath. A punched tin tile would be very nice too. But if you don't have either, pretty scrapbook paper or fabric could be used instead. The goal is to make the wreath with what you have on hand!



Recycled decorative metal sheet insert for the center of a DIY heart wreath.

What You'll Need To Make It

While you are gathering supplies to make the wreath, grab a blow dryer to help the paint dry quicker. And grab some extra glue sticks too because you'll be going through a lot of those.


This post contains affiliate links so you can see what products I used or recommend for this project. As an Amazon Associate, I earn a small commission from any qualifying purchases at no extra cost to you. Thank you for your support!


Supply List

Recycled Ticking Stripe Fabric or Ruffle Ribbon/Lace
Recycled Pizza Box
Recycled Decorative Metal Sheet Or Punched Tin Panel
Jute Rope
Vintage White Multi-Purpose Craft Paint
Bright Red Acrylic Craft Paint
Retractable Craft Knife
Hot Glue Gun
Clear Glue Sticks




How To Make A Heart Wreath With Recycled Materials

Once you have shopped your home for everything you need, making the wreath goes quite quickly.



A handmade ticking stripe Valentine wreath that cost nothing to make from recycled materials.

Recycled Pizza Box Wreath Form

We'll start with the handmade heart-shaped wreath form. The first thing you'll need to do is draw a 12-inch heart template. Fold a piece of craft paper or newspaper/flyer from your recycle bin in half. Draw a heart shape with the fold in the center and cut it out.



Making a paper heart shape to use as a DIY heart wreath template.

Use the paper template to draw a heart on both the top and bottom pieces of the pizza box and cut them out.



Top and bottom piece of a handmade heart wreath form made from a recycled pizza box.

With another piece of paper (or use the same heart template), make a 4-inch heart template. Place the smaller heart in the center of one of the cardboard hearts and carefully cut out the shape with a sharp craft knife.



The front piece of a handmade heart wreath form with heart cut out in the center.

Now that we have our heart-shaped wreath forms, it's time to add the pretty.



Painting Top Piece Pizza Box Heart Wreath Form

We'll begin with the top piece of the wreath form with the heart cut out. Have the plain side of the cardboard facing towards you and paint it with warm white craft paint. To get the paint to dry quickly, use a blow dryer or a craft heat gun set on low.



A vintage-style handmade heart wreath form painted white.

Once the last coat of white paint is completely dry, lightly distress the paint with a piece of 150-grit sandpaper. You can see in the photo below how the corrugated cardboard texture shows through the paint and resembles a cool brick pattern.



Vintage-style handmade heart wreath form painted white and distressed.

Painting Bottom Piece Pizza Box Heart Wreath Form

On the bottom heart wreath form piece, paint the printed side of the cardboard with the same warm white craft paint. This will give the back of the wreath a finished look, especially if you plan on hanging the wreath from a mirror.



If you plan on using a punched tin tile, fabric, or scrapbook paper in the center heart cut out, then jump ahead to the next step.



If you are using decorative sheet metal like I am, then we want to add a pop of red to show through the metal grid. Once the last coat of white paint on the back piece is dry, flip it over and paint the center of the heart with two coats of bright red craft paint like pictured below.



Painting the inside bottom piece of a handmade heart wreath form bright red.

Recycled Decorative Metal Sheet Insert

Cut the decorative metal sheet to fit about an inch or so larger than the heart-shaped opening. Tape it with the good side facing out on the backside of the top wreath form like pictured below.



Ignore the fact the back of the top piece of the wreath form in the photo below is painted white. My mind wandered and I thought I was painting the back of the bottom piece. 😲Oops!  Do you get engrossed in your thoughts when crafting too? 



Decorative metal embellishing the heart shape cut out center on the DIY heart wreath.

Alternatively, if you are using a punched tin tile, fabric, or scrapbook paper instead, then tape that to the back of the heart cut out.



Glue the two cardboard heart shapes together with a bead of hot glue. Trim any excess cardboard on either sheet with a sharp craft knife.



Recycled Slipcover Ruffle

Now we'll embellish the edge of the wreath with a pretty ruffle, in my case I'm using the ruffle from the old ticking stripe slipcover. Alternatively, salvage a ruffle from an old piece of clothing, pillow, or bedding, or use ruffled ribbon or lace.



My ruffle was too long for the heart wreath so I hemmed it to 1-inch and kept the trimmed pieces for another embellishment we'll be talking about further down in the post.



Ticking fabric remnant for ruffle on DIY heart wreath.

Pin the ruffle (or ribbon) about 1/2-inch from the edge of the heart wreath form. This will give the ruffle some stability and keep it upright rather than flopping backward. Once you have the placement, attach it with a bead of hot glue.



Attaching a red ticking stripe fabric ruffle around the DIY heart wreath with a hot glue gun.

Jute Rope Trim

This step is completely optional depending on the ruffle you use. To cover the raw edge of the ruffle, hot glue a strand of jute rope. Use anti-fray fabric glue or school glue (like I did) on the cut ends of the rope to prevent it from fraying.



The seam on my ruffle is large so I had to double the rope trim to conceal the raw edge.



Jute rope trim hot glued over fabric ruffle on handmade ticking stripe heart wreath.

DIY Ticking Stripe Rosettes

To embellish the center heart on the wreath I used the leftover ticking fabric from hemming the ruffle to make fabric rosettes. Alternatively, you could use small readymade fabric roses.



Embellishing the handmade heart wreath with DIY red ticking stripe fabric roses.

Embrace the frayed fabric when making these as it adds to the charm of the rosettes.

  1. Cut strips of fabric 1/2-inch wide.
  2. Fold the strips in half lengthwise.
  3. Press the fold with an iron.
  4. Roll the ribbon once and hold it with a dab of hot glue (like pictured below).
  5. Continue rolling five more times and add a dab of hot glue to hold it in place.
  6. Now you want to twist the ribbon as you wrap the fabric ten times around the roll. See the top example in the photo below. It may take a couple of attempts to master this step.
  7. Fold the fabric under the rosette and secure with a dab of hot glue.
  8. Cut the fabric strand.
  9. Repeat the steps above to make 19 more rosettes to fit around the 4-inch heart.


You can find more detailed instructions for making the roses in my fabric rosette pillow post.



Making DIY ticking fabric rosettes with a recycled slipcover fabric to embellish the handmade heart wreath.

I'm not going to lie, it can be tedious making all those rosettes but it gets faster as you get a rhythm going. It's a great project to do while watching television.



Oh, and be prepared to do a little battle with your hot glue gun. Ouch! I recommend using a small craft glue gun rather than a heavy-duty glue gun if you still want fingerprints when you're done.😉



This is completely optional but while I was in the rosette making groove, I made two larger ones to embellish the bottom of the heart along with a smaller rosette.



A ticking fabric heart wreath with DIY fabric rosettes for Valentine's Day.

Wreath Hanger

Make a loop with a narrower twine rope and hot glue it to the back of the wreath for a hanger. That's it, we're done!



If you use a blow dryer to get the paint to dry quickly, this heart wreath can be hanging on your door, a mirror, or wall within a few hours. For more DIY heart shape wreath ideas you might like this recycled scarf heart wreath or this Valentine burlap rag wreath idea.



A vintage-style heart wreath made completely with recycled materials for Valentine's Day or wedding decor.

Thanks for stopping by the Interior Frugalista today! I hope you were inspired by this ticking stripe recycled slipcover Valentine heart wreath.



Almost all of our DIY ideas have step-by-step tutorials so why not get your budget DIY on and subscribe. You can also find us on Pinterest, Facebook, Instagram, and YouTube.



If you have any questions, please leave them in the comment section below or the Contact Me tab at the top to drop me an email. I love hearing from you!



If you enjoyed this DIY vintage-style Valentine wreath from recycled materials, I'd be so thankful if you shared it with a friend and pinned it to your favorite board on Pinterest.



How to make a DIY vintage-style ticking stripe heart wreath with recycled materials and it didn't cost a dime to make for Valentine or Wedding decor. #heartwreathdiy #valentinewreathdiy #valentinecraft #recycledcrafts

I share my projects at these inspiring link parties.



Share

Comments

  1. Oh my gosh this is so ADORABLE! Who knew a pizza box could be so beautiful!

    ReplyDelete
  2. Whaaaaaaaaaat??!! I thought the whole thing was made of metal when I first saw it, I can't believe it's a pizza box!! It looks so good!

    ReplyDelete
  3. Amazing creation from a pizza box and other upcycled items, Marie! My kind of craft project!

    ReplyDelete
    Replies
    1. Thank you Gail, that means a lot coming from the Queen Of Crafts! xo

      Delete
  4. You are so creative! I love this Valentine's Day wreath so much.

    ReplyDelete
    Replies
    1. Thank you for your sweet comment, Paula, it was such fun to make.

      Delete
  5. This is absolutely beautiful, Marie! Such simple materials became this beautiful creation - I love it!

    ReplyDelete
    Replies
    1. Thank you very much, Ann! I'm quite enjoying the process of using what I already have on hand.

      Delete
  6. That is so pretty Marie! My favorite crafts are ones that come from what we already have on hand, and your heart wreath turned out amazing.

    ReplyDelete
    Replies
    1. Awe, thank you very much Tuula! I'm quite enjoying going through my stash to create new projects.

      Delete
  7. That's a great idea, Marie and with the amount of pizzas we consume it would probably take about a month to cover a whole wall with pretty hearts ;-)

    ReplyDelete
    Replies
    1. Too funny Michelle, and we've been ordering more pizza these days just for the box! I mean with St. Patrick's Day and Easter coming up, Mama needs some wreath forms! LOL

      Delete
  8. LOL Marie only you could figure out a pizza box into a beautiful heart. This is too cute. Have a great Wednesday. xoxo

    ReplyDelete
  9. So pretty! Wish we had access to pizza boxes, but it's not to be since we have to be gluten free. Love that you found a use for the ticking; it's a fave! Happy Valentine's!

    ReplyDelete
    Replies
    1. Thanks Sara, it was a fun wreath to make. Happy Valentine's Day to you too!

      Delete
  10. Ohhh, I love this Marie! Those textures and layers are decadent! This reminds me of one of those heart shaped chocolate box lids that you hold onto forever! Darling!

    ReplyDelete
    Replies
    1. Thanks Donna, yes it kind of does look like a heart shaped chocolate box lid, doesn't it. Happy Valentine's Day!

      Delete

Post a Comment

Don't be shy, I love reading your comments and reply to every single one! If you want to be notified when I reply back to you, click the "Notify Me" button below the comment box.